87
Transferring Images
Single
On the projector side, the screen is automatically set to the CUSTOM
mode.
For NV5/6/7 users:
The projector must be in IrCOM mode to receive the images. Press the
“IrCOM” button on the projector or the remote control.
4 Click the “Capture & Transfer” button in the “Capture &
Transfer” window.
| The “Capture & Transfer” window disappears and capturing
begins.
| After capturing is completed, the “Capture & Transfer” window
reappears and transfer of the captured image begins.
| The “Transmitted File Information” dialog box appears.
If you want to stop the transfer, click “CANCEL”.
To send another image
Change the image displayed on the PC monitor and then repeat step 4.
To Next Page
Loading...
