60
Single Multi
Controlling the Projector’s Adjustment
Advanced Control for Adjustment
This function enables you to control the individual projector adjustments
from your PC.
Refer to the projector’s operation manual for details on each adjustment.
● Adjustments can still be made from the Advanced Control for
Adjustment utility regardless of the difference in settings in the
projector’s menu.
● If you move to Advanced Control for Adjustment during Presentation
Transfer, Capture & Transfer or Gamma Correction, Sharp
Advanced Presentation Software Professional Edition automatically
confirms the adjustments on the projector and shows them in the
Advanced Control for Adjustment window as default settings.
● Also when you change the sheet of the Advanced Control for
Adjustment window to proceed to the other projector adjustment,
this confirmation is performed. In this case, it will repeat at regular
intervals afterwards and the Advanced Control for Adjustment
window may show the settings on the projector.
● The Automatic Power Shutoff function will not operate when performing
Advanced Control for Adjustment, although you turn “Auto Power
Off” ON in the “Options” sheet. This function operates during
Presentation Transfer, Capture & Transfer, or Gamma Correction.
To Next Page
Loading...
