30
Single
Single Projector Operation Mode
(For the connection via RS-232C or IrCOM)
1 From the “File” menu, select “Projector Setting”.
1 Area for selecting the connection type
2 Area for selecting the projector model
3 Area for COM port setup
2 Select the projector model.
3 Select “RS-232C” or “Wireless (IrCOM)” in “Connection
Type”.
● The following image is displayed when the RS-232C connection
is selected.
● The following image is displayed when the Wireless (IrCOM)
connection is selected.
For the connection via IrCOM, only the NV5-7 projectors can be used.
4 Select the “COM” port to which the projector is connected.
2
3
1
To Next Page
Loading...
