Name: Sharp XG-P25X
Brand: Sharp
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Single

Adjusting Images

Gamma Correction

Changing the gamma value adjusts the tone of an image on the screen.

This function is only available in the “Single Projector Operation Mode”.

Before Adjusting

● Use the projector’s Gamma button to set the CUSTOM mode.

● Infrared communications (IrCOM) cannot be used when performing

gamma correction. Connect a serial cable or LAN cable to the projector

and the PC (page 10), then proceed to Gamma Correction.

1 Select the “Gamma Correction” mode.

See section “Opening Modes” (page 20).

| The “Gamma Correction” window will open.

1 Specify the source of the image. The default setting is

“COMPUTER”

2 Each of these colors except “WHITE” can be adjusted respectively.

As you adjust “WHITE”, the values of the other three colors will be

offset.

Other manuals for Sharp XG-P25X

Questions and Answers:

Need help?

Do you have a question about the Sharp XG-P25X and is the answer not in the manual?

General