85
Transferring Images
Single
To send all the images (“Self Run”)
1 Select the desired method in “Self Run”.
“Continuous” sends all images in the specified folder continuously.
“Once” sends all images in the specified folder once.
2 Select the interval to send images in “Self Run”.
You can select it in the range from 30 seconds to 5 minutes fixed in
units of 15 seconds.
3 After step 4 on page 83, click the “Start” button in the
“Self Run” box of the “Presentation Transfer” window.
| The “Transmitted File Information” dialog box will appear and
the transfer will begin. If you want to stop the transfer, click “Skip”.
| After the transfer is completed, the “Slide wait” dialog box will
appear until the image will be projected on the screen. If you
want to cancel the interval and soon show the next image, click
“Next>>”.
| To cancel “Self Run”, click “Exit”.
To Next Page
