40
Single Multi
Selecting the Keylock Level
This function can be used to lock the use of certain operation buttons on
the projector.
1 From the “Control Option” menu, select “Keylock Level”.
| The “Keylock Level” dialog box will open.
1 Select the ID number/COM Port number.
2 Keylock Level selection area
3 Password Input area
2 Select the Keylock level from “Normal”,”Level A” or “Level
B”.
When using the Multiple Projector Operation Mode, select the “ID
number” or “COM Port number” before performing the above
operation.
See the diagram on the next page for the description of Keylock
Levels.
3 Input the password.
When the password has been set in the projector, the “Password
Input area” is displayed. Once displayed, enter the password.
1
2
3
To Next Page
Loading...
