Sharp XG-P25X

59
Adjusting and
Controlling
Multi
Resetting after the backup function has been activated
If a problem occurs with a projector and the backup function has been
activated, use the procedure described below to eliminate the problem
with the projector and reset the backup function.
1 Select the projector in which the problem occurred at
“Projector Setting”.
2 Clear the “Use Projector” check box, then click the
“Apply” button.
The “Backed Up By” check box is automatically cleared at
this time.
3 Eliminate the problem with the projector.
4 After the problem is eliminated, select that projector in
“Projector Setting” and select “Use Projector”.
5 Check that a suitable projector is selected as the backup
projector, then select the “Backed Up By” check box.
6 Click the “Apply” button.