Sharp XG-P25X

58
Multi
OUT
IN
PC
Do not assign a
projector that is far
from the computer
as the backup
projector.
Assign a projector that is
closer to the computer as
the backup projector.
IN
Recommended connections for using the backup function
● When using the backup function, we strongly recommend connecting
the projectors to separate ports rather than in a daisy chain as shown
on the diagram below.
● When the projectors are connected in a daisy chain, assign a projector
that is closer to the computer as the backup projector, as shown on
the diagram below. (The backup function may not work properly if a
projector that is far from the computer is assigned as the backup
projector.)
PC
IN
IN
COM1
COM2
Use different ports for the projectors to be
backed up (normally used projectors) and
the projector assigned as the backup
projector (a projector normally in the
standby mode).