Sharp XG-P25X User Manual

69
Adjusting and
Controlling
Single Multi
“Model”
Shows the model number of the projector.
“Power Status”
On: The power is on.
Off: The power is off.
Cooling: The power is off with the cooling fan turning. Do not
disconnect the power cord during “Cooling”.
“Lamp Status”
On: The lamp is on.
Off: The lamp is off.
Retry: Retrying to turn on the lamp.
Wait: Checking if the lamp is on.
“Lamp Timer”
Shows the accumulated lamp usage time. It will be reset when
replacing the lamp.
“Lamp Life”
Shows the remaining lamp life in percentage. It will be reset when
replacing the lamp.
“Trouble Status”
Temp.: The internal temperature is abnormally high. Something
may be blocking the air intake.
Fan: The filter cover is open. Securely install the filter cover.
Lamp: The lamp has a problem.
Normal: Displayed in the normal operating condition.
“Real Resolution”
Shows the resolution of the projector’s panel.
“Input Status”
Shows the selected INPUT.
“Resolution”
Shows the resolution of the computer image when projected on the
screen.
This item will not be displayed when using the t-‰eo source (NTSC
or PAL).
“Hor Freq”
Shows the horizontal frequency (kHz).
This item will not be displayed when using the video source (NTSC
or PAL).
“Vert Freq”
Shows the vertical frequency (Hz).
This item will not be displayed when using the video source (NTSC
or PAL).
“Video System”
Shows the video input system (NTSC or PAL etc.). “---” will be
displayed when the signal is a monochrome or when there is no
signal. For a forced system, an “*” will be at the start of the system
name.
Some items may not be displayed depending on the projector model.

Sharp XG-P25X Specifications

General

Resolution	1024 x 768 pixels
Dimensions (WxDxH)	319 x 155 x 423 mm
Display diagonal	1.3 \
Noise level	37 dB
Contrast ratio (typical)	600:1
Lamp power	270 W
Light source type	Lamp
Service life of light source	1500 h
Number of built-in speakers	2
Market positioning	Portable

Weight and Dimensions

Weight	9700 g