Shimadzu GC-2014 Service Manual

Chapter 3 Gas-Flow Controller
GC-2014 Service Manual
37
3.1.2.2 FTD
Reference No.
S221-75049-42
11
S221-18150-41
FLOW CONTROLLER,
1PC
N BELLOW VALVE, 2K
H2-AIR, FTD+
12
S221-41511-41
1PC
N BELLOW VALVE, 2K, WITH RESISTANCE
16
S080-53043-01
2PC
PRESSURE GAUGE, 200 kPa
17
S018-21330
TAPE, STICKER, 0.1

13

5
18
S221-18713-95
1PC
FTD-9, RESISTANCE TUBE ASSY, H2
19
S221-18713-96
1PC
FTD-9, RESISTANCE TUBE ASSY, AIR
25
S201-30219
4PC
SOCKET
27 S221-47435
1PC
MAINTENANCE
28
S221-09864-18
2PC
PIPE, MF-MM17, 2

180
29
2PC
32 S221-19503-08
2PC
MAINTENANCE
37
S201-48557-25
2PC
PIPE, MN2W-MM2W
38
1PC
39
1PC
MARK BAND A
RUBBER PLUG, INJECTION PORT,
SILICONE
PIPE, PG-MF-MF ASSY
RESISTANCE TUBE, AIR, GC-8AF
MARK BAND H


Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)