Shimadzu GC-2014 Service Manual

Chapter 4 Sample Injection Unit
GC-2014 Service Manual
45
Chapter 4 Sample Injection Unit
4.1 Configuration of Sample Injection Unit
SPL-2014 (Assembly Configuration Chart)
SPL-2014 SPL-2014 UNIT S221-71752-92
100
100-120
INJECTION PORT P ASSY
(220/240 V)
SPL-2014 SPL-2014 UNIT S221-70166-91
230
240-240
BASE, INJECTION UNIT ASSY
S221-74583-41
HEATER, PT ASSY, SPL, 100
S221-74583-44
HEATER, 240 V/124 V ASSY
HEATER, PT, ASSY, SPL, 240
S221-73335-43
AFC-2014+, SPL
S221-48440-93 S221-42559-92
PIPING ASSY
FILTER ASSY, WITH BLIND
AFC-SPL, ADDITION
S221-48441-91
BUFFER ASSY
S221-34121-94
MS FILTER, CONDITIONING
S221-48619-93
ACCESSORY ASSY SPL-2014
HEATER, 120 V/150 V ASSY
HEAT SENSITIVE MATERIAL, INJ+
WBI-2014 (Assembly Configuration Chart)
SPL-2014 SPL-2014 UNIT S221-71752-92
100
100-120
INJECTION PORT P ASSY
WBI-2014, 230
SPL-2014 UNIT S221-70166-91
240-240
BASE, INJECTION UNIT ASSY
HEATER, PT, ASSY, SPL, 230
HEATER, 240 V/124 V ASSY
HEAT SENSITIVE MATERIAL, INJ+
S221-73335-43
AFC-2014+, WBI
PIPING ASSY, S221-42559-92
AFC-WBI, ADDITION
FILTER ASSY, WITH BLIND
S221-34121-94
MS FILTER, CONDITIONING
S221-48609-91
3-PORT PIPE
HEATER, 120 V/150 V ASSYHEATER, PT, ASSY, SPL, 100
ACCESSORY ASSY, WBI-2014

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)