Shimadzu GC-2014 Service Manual

Chapter 8 Service Window
GC-2014 Service Manual
85
8.6 Serial Number
8.6.1 Main Body Serial Number
Up to 20 characters can be entered.
The unit serial number is entered before shipment. This
information is shown on self-
diagnostic reports. If, for some
reason, the serial number does not appear, it can be
entered from this window.
The type of character can be changed using the pf2 and p
f3
keys. The pf2 key is used to switch between alphabetical
and numerical characters, and the pf3 key is used to switch
between upper and lower case.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)