Chapter 8 Service Window
GC-2014 Service Manual
86
8.6.2 Unit Serial Numbers
8.7 Maintenance Log
Note: The display items vary with the unit.
This window can be used to check the serial numbers
written in ROM for automatically recognized units. There is
no display for some units. For example, the serial number
for a single injection unit (SPL unit) cannot be checked.
Information for DET#1 to DET#4 is displayed only for ports
to which something is connected.
Information for SLOT1 to SLOT6 is displayed only for ports
to which something is connected.
Records of board and flow-controller replacement and
ROM version upgrades are stored. Up to 50 items can be
recorded.
Note: Once the number of items reaches 50, the oldest
item is deleted in order to allow new information to
be recorded.
The letter that appears before "S/N" can be used to
ascertain the attached/removed status of the corresponding
part.
A: Attached
R: Removed
If all the information cannot be displayed together, the
window can be scrolled.
The pf3 key is enabled when Chromatopac is connected.
To Next Page
Loading...
