Shimadzu GC-2014 Service Manual

Chapter 5 Detector Unit
GC-2014 Service Manual
64
Configuration Diagram for FTD-2014
S221-75033-41 S221-18704-91
FTD-2014, PACKED, 100 V 1PC FTD COLLECTOR ASSY
S221-75033-42
11
FTD-2014, PACKED, 115 V
1PC
S221-75033-44 12
FTD-2014, PACKED, 230 V
1PC
S221-09688-91 13 S221-18652
1PC
PIPE, AIR IN
1PC
INSULATOR, FTD, CERAMIC
S221-42959-91 14
TRAP ASSY
1PC
S221-48457-42 S221-48386 15
1PC
CONTROLLER, FTD-2014+
BRANCHED PIPE
1PC
S221-33193-91 16
CAPILLARY ADAPTER, DET
1PC
S221-41532-98 17
GRAPHITE POSITIONING JIG, FID
2PC
S221-70745-91 101 S023-04040
FTD WIND GUARD ASSY
1PC
NUT, SUS#1, M4
102
S036-11015
1PC
O-RING, 4C, P14
S221-46520-42 103 S023-77040
1PC
FID CONTROLLER
1PC
WASHER, SUS, SPRING 2, M4
S221-75088-41
104
S020-46534
FID-2014+ HEATER ASSY
1PC
SCREW, SUS, SEMS, P3 M3

6
S221-75088-44
105
S021-01528
FID-2014 CELL BASE ASSY
1PC
SET SCREW, SUS, HOLLOW, M3

6
S221-75049-42
108
FLOW CONTROLLER, H2-AIR, FTD
1PC
109
1PC
110
S023-04020
1PC
NUT, SUS#1, M2
111
2PC
112
S023-66130
1PC
WASHER, SUS, PLAIN, M3
11
12
13
14
16
17
31
34
35
RB SOURCE HEATING TRANSFORMER ASSY, 2014
NUT, INSULATION SUPPORT
INSULATION BUSH
Reference No.
SHIELD CAP
SCREW, SUS, PAN HEAD, M216
FTD-2014, PACKED, ASSY
ELECTRODE UNIT, FTD-2014, PACKED
2PC
RELAY BLOCK, FLUOROPOLYMER
FTD OUTER TUBE
WASHER, SUS, TOOTHED, A, M2
S221-74584-41 (-44)
1PC
1PC
LOCK RING, DET, SINGLE
DET, SINGLE, BLOCK, UPPER
DET, SINGLE, BLOCK, LOWER
S020-46534
SCREW, SUS, SEMS, P3, M3

6
1PC
1PC
1PC
1PC
4PC
S020-46542
SCREW, SUS, SEMS, P3, M3

30
ACCESSORY, FTD-2014, PACKED
FTD/FTD-2014, PACKED
WASHER, PLAIN, SUS2
HEATER PT ASSY, 100 V (230 V) DET
SCREW, SUS, SEMS, P4, M325
2PC
DET, SINGLE, UPPER COVER
RETAINER PLATE, DET, SINGLE

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)