SICK FLOWSIC100 Flare User Manual

Product Description
FLOWSIC100 Flare · Operating Instructions · 8013344/11L2/V 2-5/2018-10 · © SICK Engineering GmbH 67
Subject to change without notice
Fig. 27 Connection cables
Specific requirements for selection and use of cables (esp. in hazardous areas)
→ pg. 119, § 3.8.1.
NOTICE:
● Only analog cable Exi of device type FL100 EX-S is approved for ATEX and
CSA versions (interconnection of master and slave unit).
● All other cables offered by SICK are only for ATEX/IECEx versions for use in
ATEX zone 1 or zone 2 applications.
● All cable glands offered are only for ATEX/IECEx versions for use in ATEX
zone 1 or zone 2 applications.
● Cables, cable glands and other installation material for CSA Cl I, Div 1 ver-
sions must be provided by the customer. Solutions for CSA Cl I, Div2/zone 2
versions are available on request.
POWER
Meas
FLSE100
Master
FLSE100
Slave
Connection cable
Ex zone Safe area
MCUP

SICK FLOWSIC100 Flare Specifications

General

Brand	SICK
Model	FLOWSIC100 Flare
Category	Measuring Instruments
Language	English