SICK MARSIC300

Double-clicking a Measuring screen opens a screen in which the Measuring screen can
be configured:
Figure 58: Menu Measuring Screens - Lay‐
out selection
1
Selected Measuring screen
2
Do not display the Measuring screen
3
Line Writer (see example below)
4
1 measured value box
5
4 measured value boxes
6
16 measured value boxes (see example
below)
7
2 large, 8 small measured value boxes
8
6 bar graphs (see below)
9
3 bar graphs + 2 measured value boxes
ß
3 bar graphs + 8 measured value boxes
(hidden)
à
Click “Save” to store
Measured value box
Figure 59: Menu Measuring Screens -
Example layout
Example: Measuring screen 1 with layout III
(16 measured value boxes)
1 b
Enter desired names (tags). MAR‐
SIC300 tags: see "Tags (variable
names)", page 100
Scaling the measured value box: see
"Measuring screen", page 44
The Measuring screen now looks like this.
Figure 60: Menu Measuring Screens - Com‐
ponent names
The component names and units can be, for
example, from the factory settings (e.g. RVi) the
source of a filter (e.g. FVi) or from the analyzer.
Bar graph
6 PARAMETERIZATION
48
T E C H N I C A L I N F O R M A T I O N | MARSIC300 8017585/YXD9/V3-1/2017-05 | SICK
Subject to change without notice