SICK MSC800 User Manual

Chapter 10
MSC800
8011540/14B8/2019-06-06 Operating instructions | SICK 131
Subject to change without notice
Annex
Tab. 32 Connection of the cable shields on the MSC800 ...............................................59
Tab. 33 Circuit breakers and fuses ...................................................................................60
Tab. 34 Number of ICR890 systems per MSC800 ...........................................................61
Tab. 35 MSC800-2300: connection of the supply voltage cable for an ICR890
system ...................................................................................................................61
Tab. 36 MSC800-3400: connection of the supply voltage cables for two ICR890
systems .................................................................................................................62
Tab. 37 MSC800-3600: connection of the supply voltage cables for three
ICR890 systems ....................................................................................................63
Tab. 38 Maximum lengths of cable between MSC800 and Host ....................................64
Tab. 39 CAN bus: maximum lengths of cable depending on the data
transmission rate ..................................................................................................65
Tab. 40 CAN bus: maximum lengths of stub cables depending on the data
transmission rate ..................................................................................................65
Tab. 41 CAN bus: required wire cross-section depending on the data cable length ........66
Tab. 42 CAN bus: maximum lengths of cable depending on the number of CLV490 .......66
Tab. 43 Characteristic data for switching input TRIGGER_1 ...........................................68
Tab. 44 Characteristic data of the digital switching outputs OUT_1 to OUT_4 ...............69
Tab. 45 Characteristic data of the relay outputs ..............................................................70
Tab. 46 MSC800: pin assignment of the 8-pin RJ-45 female connectors
“ETHERNET 1”, “ETHERNET 2”, and “ETHERNET 3” ..........................................71
Tab. 47 MSC800: pin assignment of the 9-pin D-SUB male connector “AUX 1” ............71
Tab. 48 MSC800: pin assignment of the 9-pin D-Sub male connector “PROFIBUS” ........71
Tab. 49 Assignment of wire colors: cable no. 6021166/no. 6021175 (CAN 1-IN),
PVC-free .................................................................................................................72
Tab. 50 SOPAS-ET configuration software default (excerpt) ............................................74
Tab. 51 Connection between PC with SOPAS-ET configuration software and the
MSC800 ................................................................................................................76
Tab. 52 MSC800 technical specifications ........................................................................91
Tab. 53 Ordering information: modular system controller MSC800 ............................ 119
Tab. 54 Ordering information: modular system controller MSC800 (continued) ........ 120
Tab. 55 Available accessories: pre-wired cables for CAN SENSOR Network ............... 120
Tab. 56 Available accessories: male connector covers for CLV490 / VMS4xx/5xx
(CAN SENSOR network) ..................................................................................... 121
Tab. 57 Available accessories: pre-wired cables for Ethernet connection................... 121
Tab. 58 Available accessories: incremental encoder .................................................... 121
Tab. 59 Available accessories: filter mat for ventilation of the MSC800-2100/
-2300/-3400/-3600 .......................................................................................... 122
Tab. 60 Ordering information: power supply unit module (spare part) for
MSC800-1100/-2100/ -2300 .......................................................................... 122
Tab. 61 Ordering information: power supply unit module (spare part) for
MSC800-2300/-3400/ -3600
.......................................................................... 122
Tab. 62 Supplementary documentation for the MSC800 ............................................. 123

SICK MSC800 Specifications

General

Brand	SICK
Model	MSC800
Category	Controller
Language	English