General Technical Specifications
1-8
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
1.3 Shipping and Storage Conditions for Modules and Backup
Batteries
Shipping and storage of modules
S7-300 modules surpass the requirements of IEC 61131-2, in respect of shipping
and storage requirements. The following details apply to modules shipped and/or
stored in their original packing.
Climatic conditions correspond to IEC 60721-3-3, Class 3K7 for storage and IEC
60721-3-2, Class 2K4 for transportation.
Mechanical conditions correspond to IEC 60721-3-2, Class 2M2.
Table 1-4 Shipping and Storage Conditions for Modules
Condition
Permitted range
Free fall (in shipping packing) v 1m
Temperature from – 40 C to + 70C
Atmospheric pressure 1080 to 660 hPa (corresponding to an
altitude of –1000 to 3500 m)
Relative humidity 10 to 95 %, no condensation
Sinusoidal oscillations
to IEC 60068-2-6
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 9.8 m/s
2
Shock according to IEC 60068-2-29 250 m/s
2
, 6 ms, 1000 shocks
Transporting backup batteries
Wherever possible, transport backup batteries in their original packing. Special
approval does not have to be obtained for transporting backup batteries for S7-300
systems. The lithium content of the backup battery is approximately 0.25 g.
To Next Page
Loading...
Need help?
General
