Siemens 6ES7 305-1BA80-0AA0 Reference Manual

A-42
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Structure of data record 1
The figure below shows the structure of data record 1 for the parameters of the
analog input/output modules.
You activate a parameter by setting the corresponding bit in byte 0 and 1 to “1”.
Byte 0
70
Byte 1
Channel 0
Channel 1
Channel 3
Channel 2
Reset Time
Byte 2
Byte 3
Byte 4
Byte 5
7043
Meas. channel 0
Meas. channel 2
Meas. channel 1
Meas. channel 3
Measuring
Range
Measuring
Method
70
Not relevant
:
Byte 8
:
Byte 13
Byte 6
Byte 7
7043
Output channel 0
Output channel 1
Output RangeOutput type
Set the same parameters for
all channels.
Not relevant
Figure A-19 Data Record 1 for Parameters of the Analog Input/Output Modules

Siemens 6ES7 305-1BA80-0AA0 Specifications

General

Brand	Siemens
Model	6ES7 305-1BA80-0AA0
Category	Controller
Language	English