Siemens 6RA70 Series - P971 EEPROM Transfer; R980 List of Existing Parameter Numbers, Start; R990 List of Modified Parameter Numbers, Start

10-92 SIEMENS Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions
PNU Description Value range
[Unit]
Steps
No. indices
Factory
setting
Type
See
Change
(Access /
Status)
P971
*
EEPROM transfer
Transfer of parameter values from RAM to EERPROM on switchover from 0
to 1.
It takes approximately 15s to process all values. The PMU remains in value
mode for this period.
0 to 1
1
Ind: None
FS=0
Type: O2
P052 = 3
P051 = 40
Offline
r980 List of existing parameter numbers, start
Visualization parameter for displaying the first 100 parameter numbers in
the P or r parameter range (0 to 999). The parameter numbers are listed in
ascending sequence.
Repetition of a number over several indices means that there are no further
parameter numbers in the 0 to 999 range.
The list is continued at the parameter whose number is displayed under
index 101.
See also r989
Ind: 101
Type: O2
P052 = 3
r981 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r982 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r983 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r984 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r985 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r986 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r987 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r988 List of existing parameter numbers, continuation
See r980.
Ind: 101
Type: O2
P052 = 3
r989 List of existing parameter numbers, continuation
Continuation of the list can be found under index 101. Please note:
860 = r860 (TECH BOARD installed)
2980 = n980
See also r980.
Ind: 101
Type: O2
P052 = 3
r990 List of modified parameter numbers, start
Visualization parameter for displaying the first 100 modified parameters in
the P or r parameter range (0 to 999). The parameter numbers are listed in
ascending sequence.
Repetition of a number over several indices means that there are no further
modified parameters in the 0 to 999 range.
The list is continued at the parameter whose number is displayed under
index 101.
See also r999.
Ind: 101
Type: O2
P052 = 3
r991 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3
r992 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3
r993 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3
r994 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3
r995 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3
r996 List of modified parameter numbers, continuation
See r990.
Ind: 101
Type: O2
P052 = 3