118 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
• Edit an operator name
• Delete an operator
• Print the operators list
• Delete the operators list
To view the operators list, perform the following steps:
1. Select View operators list.
The authorized operators display.
2. Use the scroll arrows to view the operators in the list.
To edit an operator name, perform the following steps:
1. On the Authorized Operator-Operators list screen, select an
operator.
2. On the Authorized operator screen, select Edit.
3. Change the operator name.
4. Select Done.
To delete an operator, perform the following steps:
1. On the Authorized Operator-Operators list screen, select an
operator.
2. Select Delete entry.
3. Select Yes to confirm the deletion.
Note To add an operator, see Add an Operator‚ page 115.
To print all operators, perform the following steps:
Select Print.
The system prints only the first 100 operators, and in alphabetical
order.
Note You can print the operators on an external printer but only if
you connect the CLINITEK Status+ analyzer to a CLINITEK Status
connector.
To delete all operators in the list, perform the following steps:
1. On the Authorized operator screen, select Delete operators list.
The Delete operators list caution screen displays.
To Next Page
Loading...
Need help?
General
