162 CLINITEK Status+ Analyzer Operator’s Guide
Glossary
default setting A value defined and preset by Siemens.
delete A function an operator uses to remove an
object, such as test results or an authorized
operator, from the system database.
diagnostic screen A software UI screen which enables the
operator to perform a system diagnostic test
when troubleshooting the analyzer.
disabled The state when a software feature or
function, such as a configuration setting, is
not available.
enabled The state when a software feature or
function, such as a configuration setting, is
available.
error An event that prevents the analyzer from
operating as expected.
error code A number displayed by the analyzer to
communicate the occurrence of an error to
the operator.
export To copy setup data from the analyzer to a
removable data storage device.
Full Test A strip or cassette test where the operator is
prompted to enter patient and operator
information.
help Information presented to the operator to
assist them with the completion of a task or
operation.
Help screen The screen that displays the help
information to the operator.
humidity check Detects if the strip is exposed to humidity
and if so, displays an error message.
icon An graphical depiction of a control in the
software UI.
import To copy setup data from a removable data
storage device to the analyzer.
Term Definition
To Next Page
Loading...
Need help?
General
