Siemens FS720 - Page 118

Updating the firmware
Station: Updating the FW of the main CPU and additional CPUs
22
118 | 178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
Starting the firmware update at the 'Station' – FCM2004
1. Select 'Initiate update at station'.
a The following window is opened:
2. Set the 'S38-2' switch to 'ON' on the rear of the operating unit.
3. Press the 'S32' button for approx. 5 s until the 'Station' restarts.
a The firmware update starts and takes up to ten minutes.