Siemens MODULARIS Uro Plus - Reading Software Versions (G20, Adara, Prima)

MUP Menu Ultrasound Device 8 - 7
Siemens AG SPL1-130.840.02 Page 7 of 8 MODULARIS Uro Plus
Medical Solutions Rev. 03 04.05 CS PS 24
Readout the Software Version G20 8
• The software version is displayed on the monitor during power-up of the unit.
Readout the Software Version Adara 8
• Press the "F4" key.
• Press the "5" key.
• Select service with the track ball.
• Press the key.
• Enter the password.
• Use the track ball to select "System configuration".
• Press the key.8
• Software version is indicated.
Readout the Software Version Prima
• Enter "VERSION#=z" .
Note the following:
- You must have at minimum version V2.8.0 installed.
- Use capital letters to make entries, the key must only be used for the # symbol.
- The entry is not visible on the monitor.