Siemens SIMATIC IPC RW-545A

Technical specifications
9.3 Current and power requirements and power supply units
145
Typical power values
Component Current consumption
(U = 230 V; AC)
Power consumption
Basic device Core i3 / i5 / i7 / i9
0.55 A
127 W
1 × hard disk drive SATA
0.03 A
7.3 W
2 × hard disk drives SATA
0.07 A
14.7 W
3 × hard disk drives SATA
0.1 A
22.0 W
1 × hard disk drive SATA type Enterprise
0.05 A
12.1 W
2 × hard disk drives SATA type Enterprise
0.11 A
24.2 W
3 × hard disk drives SATA type Enterprise
0.16 A
36.3 W
1 × SSD 2.5" drive SATA
0.02 A
3.6 W
1 x M.2 NVMe SSD
0.03 A
5.9 W
Graphics card: NVIDIA T400
0.14 A
33.0 W
Graphics card: NVIDIA RTX A2000
0.32 A
74.0 W
Graphics card: NVIDIA RTX A4000
0.68 A
155.0 W
Graphics card: NVIDIA RTX A5000
1.2 A
255.0 W
9.3.2 Technical specifications of the 550 W power supply unit
See the note in "Applicability of technical specifications (Page 141)".
Output voltage and maximum current
Voltage
Maximum current
Voltage stability
+12 V1
26 A
± 5%
+12 V2
15 A
± 5%
–12 V
0.1 A
± 10%
+5 V
22 A
1
± 5%
+3.3 V
25 A
1
± 5%
+5 Vaux
2 A
+5%, -3%
1
The total output of the +5 V and +3.3 V voltage must be ≤ 150 W.
The total output of all voltages is max. 550 W.
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA