Siemens SIMATIC IPC RW-545A

Unpacking and installing the device
3.1 Unpacking the device
53
3.1.3 Device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or loss.
The following illustrations are examples. The data of your device may differ from the data in
these examples.
Nameplate
The nameplate is located inside the front door.
Example: SIMATIC IPC RW-545A nameplate (the information on the nameplate is device-
specific)
Identification data of the device
①
QR code for information about the device
②
Item number of the device (device-specific)
③
Serial number of the device (device-specific)
④
MAC-Addresses (Media Access Control Addresses):
MAC address of the device's LAN ports (device-specific)
⑤
FS (Functional State): Functional state of the device
⑥
Information on the device equipment (device-specific)
⑦
Symbols of certificates and approvals (Page 182)
Symbols for safe use and disposal (Page 181)
⑧
FCC Rules (USA) (Page 164)
⑨
ICES Compliance (Canada) (Page 164)
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA