Safety instructions
2.3 Safety instructions for assembly
42
2.3 Safety instructions for assembly
Fire protection enclosure
Note
The device meets the requirements for fire protection enclosures in accordance with
IEC/EN/UL/CAN/CSA
-C22.2 No. 61010-2-201. It can therefore be installed without an
additional fire protection cover.
Approvals expire if the instructions are not observed
Approvals expire if the instructions are not observed
If the ambient and environmental conditions are not complied with during installation and
operation of the device or system, the approvals according to IEC/EN/UL/CAN/CSA-C22.2 No.
61010-2-201 are voided.
There is a risk of overheating and personal injury.
Note the following instructions and information under:
• "Climatic and mechanical environmental conditions (Page 148)"
• "Safety instructions on ambient and environmental conditions (Page 44)"
Workstation SIMATIC IPC
RW-545A Operating
Instructions, 08/2023, A5E52943278-AA
To Next Page
Loading...
