Safety instructions
2.4 Safety instructions on ambient and environmental conditions
44
2.4 Safety instructions on ambient and environmental conditions
Approvals expire if the instructions are not observed
Approvals expire if the instructions are not observed
If the ambient and environmental conditions are not complied with during installation and
operation of the device or system, the approvals according to IEC/EN/UL/CAN/CSA-C22.2 No.
61010-2-201 are voided.
There is a risk of overheating and personal injury.
Danger if ambient conditions are unsuitable
Ambient conditions and chemical resistance
Unsuitable ambient conditions may cause faults or damage the device.
Failure to comply will void the warranty and approval in accordance with
IEC/EN/UL/CAN/CSA-C22.2 No. 61010-2-201.
• When the device is operated in severe environments which are subject to caustic vapors
or gases, ensure sufficient clean air is provided.
• Clean the enclosure surface with a damp cloth.
• Make sure that no water gets inside the device.
Workstation SIMATIC IPC
RW-545A Operating
Instructions, 08/2023, A5E52943278-AA
To Next Page
Loading...
