Product description
1.4 External design of the device
22
USB 3.2 Gen2x2 Type C (20 Gbps)
2
backwards compatible to USB 3.0 / 2.0 / 1.1; each 1500 mA / high current
1
• (X61)
DisplayPort (labeling on the device: DPP), for connection of monitors
• DPP 2 (X72)
DisplayPort (labeling on the device: DPP), for connection of monitors
• DPP 1 (X71)
DisplayPort (labeling on the device: DPP), for connection of monitors
• DPP 3 (X73)
1
Sum of the currents on the USB interfaces of the device (including the internal USB interfaces) ≤ 3
A
2
Maximum cable length: 3 m; depending on attenuation of the cable and maximum data rate of
the connection. Use the original connection technology of the I/O devices to be connected without
adapters and without extensions.
Connections of graphics cards
Graphics cards are expansion cards. After installing a graphics card, additional connections
are available on the back of the device in the vicinity of the expansion cards for connecting
monitors.
You can find information on these connections and connection options for monitors with
adapters under "Connecting several monitors (multi-monitoring) (Page 63)".
You can find information on the graphics cards under "Technical specifications of graphic
(Page 152)".
1.4.4.3 Connection of power supply unit 550 W
Socket for power plug
Workstation SIMATIC IPC
RW-545A Operating
Instructions, 08/2023, A5E52943278-AA
To Next Page
Loading...
