Tables, data records
3.5 Modbus data tables
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
285
Discrete
input / coil
address
0x1C07
low Bit
Event - startup parameter block active
0x1C71 Event - parameter changes not allowed in the current
r
Event - Device does not support the required functions
Event - Password protection active
Event - Parameterization active
high Bit
0x1C08
low Bit
Event - DM-FL configuration operation
Event - DM-FL actual and set configuration are different
Event - DM-FL waiting for start-up test
0x1C83
Reserved
r
0x1C84 Event - initialization module write-protected, parameter
r
0x1C85 Event - memory module write-protected r
Event - initialization module write-protected
Event - initialization module ident. data write protected
high Bit
Warning - overload operation
Warning - Overload + phase failure
Warning - Internal ground fault
Warning - external ground fault
Warning - Thermistor overload
0x1C09
low Bit
Warning - Thermistor short circuit
Warning - Thermistor open circuit
Warning - TM1 warning T >
Warning - TM1 sensor fault
Warning - TM1 out of range
Warning - EM+ open circuit
To Next Page
Loading...
Need help?
General
