Siemens SIMOCODE pro - Page 322

Tables, data records
3.6 EtherNet/IP data tables
SIMOCODE pro - Communication
322 Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Instance 151: Input assembly SIMOCODE basic type 2
The table below describes the format of attribute 3:
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0 Cycl. send
byte 0 -
bit 0.7
Cycl. send
byte 0 -
bit 0.6
Cycl. send
byte 0 -
bit 0.5
Cycl. send
byte 0 -
bit 0.4
Cycl. send
byte 0 -
bit 0.3
Cycl. send
byte 0 -
bit 0.2
Cycl. send
byte 0 -
bit 0.1
Cycl. send
byte 0 -
bit 0.0
1 Cycl. send
byte 1 -
bit 1.7
Cycl. send
byte 1 -
bit 1.6
Cycl. send
byte 1 -
bit 1.5
Cycl. send
byte 1 -
bit 1.4
Cycl. send
byte 1 -
bit 1.3
Cycl. send
byte 1 -
bit 1.2
Cycl. send
byte 1 -
bit 1.1
Cycl. send
byte 1 -
bit 1.0
2 ... 3
Cycl. send byte 2/3 - analog value 1
The bit and analog values signaled by SIMOCODE pro to the control system via
instance 151 can be freely assigned in the SIMOCODE ES (TIA Portal) software.
Corresponding function blocks in the SIMOCODE ES (TIA Portal) charts:
Default settings of cyclic receive and send data: See Assignment of cyclic receive and send
data for predefined control functions (Page 128).