Siemens SIMOTION D4x5-2 DP/PN

P272 Break-point coordinate IN1_POS
First positive IN break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
P273 Break-point coordinate OUT1_POS
First positive OUT break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
P274 Break-point coordinate IN2_POS
Second positive IN break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
P275 Break-point coordinate OUT2_POS
Second positive OUT break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
P276 Break-point coordinate IN3_POS
Third positive IN break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
P277 Break-point coordinate OUT3_POS
Third positive OUT break-point coordinate
Default: 0 [mm/s] min: 0 [mm/s] max: 100000 [mm/s]
Access code: 0
Parameters
11.9 TLS
SC integrated STS, GSU
426 Operating Instructions, 07/2019, A5E48271265B AA