Siemens SINUMERIK 802D sl Operation And Programming Manual

AUTOMATIC Mode
5.3 Stopping / canceling a part program
5-62
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Fig. 5-7 Entering the searched term
A toggle field is provided to define from which position you will search for the term.
Search result
The required block is displayed in the “Current block” window.
5.3 Stopping / canceling a part program
Operating sequence
Press <NC STOP> to cancel a part program.
Press <NC START> to continue the program execution.
Use <RESET> to interrupt the program currently running.
Pressing <NC START> again will restart the program you have interrupted and execute the
program from the beginning.

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English