Siemens SINUMERIK 802D sl Operation And Programming Manual

Part Programming
6.1 Entering a new program “Program” operating area
6-68
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
6.1 Entering a new program “Program” operating area
Operating sequences
You have selected the Program Manager.
Use either <NC directory> softkey or the Customer CF card softkey to select the location
where you want to store the new program.
Select the <New file> softkey to obtain a new dialog window into which the new main pro-
gram or subroutine names are entered. The .MPF extension for main programs is entered
automatically. The .SPF extension for subroutines must be entered along with the program
name.
Fig. 6-2 The New program interactive screenform
Enter the name for the new program.
Use the <OK> softkey to confirm your input. The new part program file will be created, and
the editor window is opened automatically.
Use <Abort> to cancel the creation of the program; the window will be closed.
NC
directory
New file

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English