Siemens SINUMERIK 802D sl Operation And Programming Manual

Part Programming
6-67
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Selecting this softkey provides the functions required to read out / read in files via the CF
card and the function “Program execution from external”. When the function is selected, the
directories of the CF card are displayed.
Use this softkey to select the program on which the cursor is positioned for execution. If the
CF card is selected, the program is executed by the NC as an external program. This pro-
gram must not contain any program calls of part programs which are not stored in the direc-
tory of the NC.
Selecting this softkey provides the functions required to read out / read in files via the RS232
interface and the function “Program execution from external”.
Use this function to transmit files from the clipboard to a PC connected to the RS232.
Use this softkey to load files via the RS232 interface.
For the settings of the interface, please refer to the System operating area (Chapter 7). The
part programs must be transmitted using the text format.
Error log
Customer
CF card
Execution
from external
RCS
connect.
RS232
Send
Receive
Error
log

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English