5-55
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
AUTOMATIC Mode
Prerequisite
The machine is set up for the AUTOMATIC mode according to the specifications of the ma-
chine manufacturer.
Operating sequence
Select the AUTOMATIC mode using the <AUTOMATIC> key on the machine control panel.
The AUTOMATIC start screen appears, displaying the position, feedrate, spindle, and tool
values, as well as the block currently active.
Fig. 5-1 The AUTOMATIC start screen
5
To Next Page
Loading...
