System
7.2 Reading in / reading out PLC projects
7-107
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Reading in the start-up archive from the CompactFlash card
To import a start-up archive, perform the following operator actions:
1. Insert the CF card.
2. Select the <Customer CF card> softkey and select the line with the desired archive file.
3. Use <Copy> to copy the file to the clipboard.
4. Select the <802D data> softkey and place the cursor on the Start-up archive (NC/PLC)
line.
5. Select <Paste> to start the start-up.
6. Acknowledge the start dialog on the control system.
7.2 Reading in / reading out PLC projects
When reading in a project, this will be transferred to the file system of the PLC and then acti-
vated. To complete the activation, the control system is restarted (warm start).
Reading in the start-up archive from the CompactFlash card
To import a PLC project, perform the following operator actions:
1. Insert the CF card.
2. Select the <Customer CF card> softkey and select the line with the desired project file
in the PTE format.
3. Use <Copy> to copy the file to the clipboard.
4. Select the <802D data> softkey and position the cursor on the PLC project (PT802D
*.PTE) line.
5. Select the <Paste> softkey to start reading in and archiving.
Writing the project to the CompactFlash card
Perform the following operator actions:
1. Insert the CF card.
2. Select the <802D data> softkey and position the direction keys on the PLC project
(PT802D *.PTE) line.
3. Use <Copy> to copy the file to the clipboard.
4. Select the <Customer CF card> softkey and select the archiving location for the file.
5. Select the <Paste> softkey to start writing.
To Next Page
Loading...
Need help?
General
