Part Programming
6.3 Simulation
6-75
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Round punch form
Use the Radius input field to vary the punch diameter.
Fig. 6-10 Round punch form
Triangular punch form
Use the Angle input field to define the aperture angle of the triangle. The height of the
triangle is determined by the Height field. The resulting triangle is centered to the center
point of the envelope circle.
Fig. 6-11 Triangular punch form
To Next Page
Loading...
