System
7-87
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
To display all parameters, position the cursor on the appropriate unit and select the <Para-
meter display> softkey. For a description of the parameters, please refer to the documenta-
tion of SINAMICS drives.
Fig. 7-10 Parameter list
Display machine data
Open the “Display machine data” window. Use the PageUp / PageDown keys to browse for-
ward / backward.
Note for the Reader
For a description of the machine data, please refer to the
SINUMERIK 802D sl “Lists” Manual.
Use the <Softkey color> and <Window color> softkeys to specify user-defined color set-
tings. The displayed color consists of the components red, green and blue.
The “Change color” window displays the values currently set in the input fields. The desired
color can be produced by changing these values. In addition, the brightness can be chan-
ged.
The next mixing ratio is displayed temporarily upon completion of an input. Use the cursor
keys to switch between the input fields.
Select the <OK> softkey to accept your settings and to quit the dialog. Selecting the
<Abort> softkey will quit the dialog box without saving your changes.
Use this function to change the colors of the tip and softkey area.
Display
MD
Changing
colors
Softkey
color
To Next Page
Loading...
