Siemens Sinumerik 840D Series Function Manual

10.03
4.15 Parameters table
4-166
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
The unit relates the the machine data default
SCALING_FACTOR_USER_DEF_MASK and
SCALING_FACTOR_USER_DEF.
The field is identified with “-” if the MD is not based on a physical unit.
Selectable data sets associated with one parameter.
The following data types are used in the control system:
S BOOLEAN Machine data bit (1 or 0)
S BYTE Integers (from -128 to +127)
S DOUBLE Real values or integers
(from +/-4.19*10
- 307
to +/-1.67*10
308
)
S DWORD Integers (from -2.147*10
9
to +2.147*10
9
)
S STRING Character string (max. 16 characters) consisting of
capital letters with digits and underscore
S UNSIGNED WORD Integers (from 0 to 65536)
S SIGNED WORD Integers (from -32768 to 32767)
S UNSIGNED DWORD Integers (from 0 to 4294967300)
S SIGNED DWORD Integers (from -2147483650 to 2147483649)
S WORD Hex values (from 0000 to FFFF)
S DWORD Hex values (from 00000000 to FFFFFFFF)
S FLOAT DWORD Real values (from “8.43*10
-37
to ”3.37*10
38
)
HLA firmware 1.02.12
Unit
Index
Data type
Version
4 Firmware Drive Functions
02.99

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels