Siemens Sinumerik 840D Series Function Manual

10.03
D.1 Electrical applications
D-265
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
SIMODRIVE (07.03 Edition)
Planning Guide 1PL6 Asynchronous Motors
Order No.: 6SN1197-0AC66-0BP0
SINUMERIK 840D/840Di/810D (09.03 Edition)
Operator Components Manual (HW)
Order No.: 6FC5297-6AA50-0BP3
SIMODRIVE Sensor (03.03 Edition)
User’s Guide (HW) Absolute Position Sensor with PROFIBUS DP
Order No.: 6SN1197-0AB10-0YP2
SINUMERIK, SIROTEC, SIMODRIVE (06.99 Edition)
Planning Guide (HW) EMC Installation Guide
Order No.: 6FC5297-0AD30-0BP1
The current Declaration of Conformity is available under the following Internet
address:
http://www4.ad.siemens.de
Please enter the ID No.: 15257461 in the ’Search’ field (top right) and click on
“go”.
SINUMERIK/SIMOTION
ADI4 - Analog Drive Interface for 4 Axes (09.03 Edition)
Manual
Order No.: 6FC5297-0BA01-0BP1
SIMODRIVE (05.03 Edition)
Planning Guide 1FK6 Three-Phase AC Servomotors
Order No.: 6SN1197-0AD05-0BP0
SIMODRIVE (01.03 Edition)
Planning Guide 1FK7 Three-Phase AC Servomotors
Order No.: 6SN1197-0AD06-0BP0
SIMODRIVE (07.03 Edition)
Planning Guide 1FS6 Three-Phase AC Servomotors
Order No.: 6SN1197-0AD08-0BP0
SIMODRIVE (05.03 Edition)
Planning Guide 1FT5 Three-Phase AC Servomotors
Order No.: 6SN1197-0AD01-0BP0
SIMODRIVE (05.03 Edition)
Planning Guide 1FT6 Three-Phase AC Servomotors
Order No.: 6SN1197-0AD02-0BP0
/APL6/
/BH/
/BHA/
/EMV/
/GHA/
/PFK6/
/PFK7/
/PFS6/
/PFT5/
/PFT6/
D References

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels