Siemens Sinumerik 840D Series Function Manual

10.03
D.1 Electrical applications
D-266
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
SINUMERIK 810D
Configuring Manual CCU (HW) (11.02 Edition)
Order No.: 6FC5297-6AD10-0BP1
SINUMERIK 840D (09.03 Edition)
Configuring Manual NCU (HW)
Order No.: 6FC5297-6AC10-0BP3
SIMODRIVE 611 / Masterdrives MC (01.03 Edition)
Planning Guide Three-Phase AC Servomotors
General Part
Order No.: 6SN1197-0AD07-0BP0
SIMODRIVE (07.03 Edition)
Planning Guide Asynchronous Motors (Compendium)
Order No.: 6SN1197-0AC61-0BP0
SIMODRIVE (02.03 Edition)
Planning Guide 1FE1 Built-In Synchronous Motors
Three-Phase AC Motors for Main Spindle Drives
Order No.: 6SN1197-0AC00-0BP4
SIMODRIVE (12.02 Edition)
Installation Guide 1FE1 051.-1FE1 147. Built-In Synchronous Motors
Three-Phase AC Motors for Main Spindle Drives
Order No.: 610.43000.02
SIMODRIVE (06.02 Edition)
Planning Guide 1FN1, 1FN3 Linear Motors
ALL General Information about Linear Motors
1FN1 1FN1 Three-Phase AC Linear Motor
1FN3 1FN3 Three-Phase AC Linear Motor
CON Connections
Order No.: 6SN1197-0AB70-0BP4
SIMODRIVE (11.00 Edition)
Planning Guide Motors
Three-Phase AC Servo Motors for Feed and Main Spindle Drives
Order No.: 6SN1197-0AC20-0BP0
SIMODRIVE (07.03 Edition)
Planning Guide Servomotors
Three-Phase AC Motors for Feed and Main Spindle Drives
Order No.: 6SN1197-0AA20-0BP4
/PHC/
/PHD/
/PJAL/
/PJAS/
/PJFE/
/PJF1/
/PJLM/
/PJM/
/PJM2/
D References

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels