Siemens SIPROTEC 7SJ62 Instruction Manual

Routine Checks and Maintenance
9-12 7SJ62 Manual
C53000-G1140-C121-1
o Attach all Align all D-subminiature plugs to the matching D-subminiature sockets.
o Screw in the fiber optic cables where applicable.
Close the protective switches to apply voltage to the power supply. If the green “RUN”
LED does not light, there is a fault in the power supply. The device should be sent to
the factory. See Section 9.6.
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English