Configuration in STEP 7
5.6 Configuring networks and network nodes in STEP 7 / NetPro
TIM DNP3
106 System Manual, 06/2014, C79000-G8976-C253-03
● Number of spontaneous messages:
This parameter cannot be configured for DNP3 and has no significance.
● Limit for locked messages:
This parameter cannot be configured for DNP3 and has no significance.
The Dedicated Line tab contains special parameters required only when using dedicated
lines.
Figure 5-18 Properties - DNP3 Dedicated Line TIM dialog, Dedicated Line tab
The parameters for dedicated lines include:
To Next Page
Loading...
