Need help?Do you have a question about the Siemens VDO DTCO 1381 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | VDO DTCO 1381 |
| Category | Recording Equipment |
| Language | English |
Technical description of the DTCO 1381 tachograph, release 1.2a.
Address to the user regarding the document's content and limitations.
Explains that the documentation is intended for internal use only.
Identifies Siemens VDO Automotive AG as responsible for the document's content.
Provides contact information for customer support regarding the product.
Provides a schematic overview of the DTCO 1381 system components.
Describes the DTCO 1381, KITAS 2171, printouts, printer paper, and display instrument.
Details general features and special equipment/options for the DTCO 1381.
Provides a detailed description of the DTCO 1381 device, including front and rear sides.
Describes the KITAS 2171 motion sensor and its product variations.
Explains the different types of tachograph cards and their usage.
Provides installation dimensions, pin assignments, and connection specifications for the DTCO 1381.
Details technical data for KITAS 2171, including integrated and standard versions.
Illustrates the connection diagram for the DTCO 1381 with external devices.
Provides general instructions for operating the DTCO 1381, including card handling.
Explains the different display modes and messages shown on the DTCO 1381.
Details how to navigate and use the menu functions of the DTCO 1381.
Describes the procedure for entering calibration mode using a workshop card.
Explains the steps required to prepare for downloading data from the DTCO 1381.
Describes how the DTCO 1381 registers and stores driver and vehicle data.
Explains the data flow and memory usage within the DTCO 1381.
Details the data stored on driver, workshop, control, and company cards.
Explains the process and cases for downloading data from the DTCO 1381.
Defines access rights to saved data based on tachograph card usage.
Provides general guidelines for installation, including terminology and prerequisites.
Describes the correct installation procedures for DTCO 1381 components in vehicles.
Outlines legal requirements and manufacturer specifications for the installation site.
Lists the necessary tools and installation accessories for the DTCO 1381.
Details the step-by-step process for performing the installation of the DTCO 1381.
Covers legal requirements and system requirements for ADR vehicles.
Provides installation instructions specific to the ADR variant.
Presents the EC type-examination certificate for the DTCO 1381 ADR variant.
Presents the EC type-examination certificate for the KITAS 2171 sensor.
Provides general instructions for preprogramming the DTCO 1381.
Lists the required testing equipment for preprogramming.
Details the steps for performing the preprogramming of parameters.
Provides general instructions for the installation and functional test.
Explains the necessity and procedure for the installation and functional test.
Defines the permissible error limits for distance, speed, and time measurements.
Details how to create and seal the installation plate after testing.
Provides general instructions and terminology definitions for activation.
Explains how to check the buffer battery based on production date.
Details the steps for performing the activation of the DTCO 1381.
Provides general instructions, personnel, and technical prerequisites for calibration.
Outlines legal requirements and access methods for calibration functions.
Lists the required testing equipment for calibration and authentication.
Explains how to check the buffer battery based on production date.
Details the steps required to perform the first calibration of the DTCO 1381.
Provides general instructions, prerequisites, and handling of tachograph cards.
Covers legal requirements and access to calibration functions for regular inspection.
Details the legal requirements for performing a regularly inspection.
Lists the required testing equipment for calibration and authentication.
Explains how to check the buffer battery based on production date.
Details the steps for performing the regularly inspection of the DTCO 1381.
States that the DTCO 1381 employs maintenance-free technology.
Provides instructions for buffer battery replacement and disposal.
Describes the procedure for cleaning the DTCO 1381 housing, display, and keys.
Provides guidelines for the disposal of EC recording equipment.
Explains how the DTCO 1381 monitors and displays events, faults, and safety violations.
Describes how to display saved events and faults from driver cards and data memory.
Details how to print saved events and faults from driver cards and data memory.
Lists messages and provides troubleshooting measures for errors and faults.
Describes operating conditions like standby, undervoltage, and overvoltage modes.
Lists and explains individual pictograms and their combinations.
Provides examples of various printouts from the DTCO 1381.
Explains the data blocks and specifications within printout examples.
Describes how events and faults are registered and saved in memory.
To Next Page