Appendix 14.4 Explanation of printout examples
Edition 07/2007 Technical Description DTCO 1381 14 - 29
TD00.1381.00 132 102
Handwritten information
• fu = Location of control
• f = Signature of the controller
• ky = Start time
• yk = End time
• d = Signature of the driver
Information about the cardholder of the recorded profile
• Last name of driver
• First name of driver
•Card identification
Remark
Missing information about the cardholder means: no driver card inserted in card slot 1.
• Beginning of the profile recording with date and time
• End of the profile recording with date and time
Remark
New profiles are created:
– by inserting / withdrawing a tachograph card into / from card slot 1
– by a day change
– by a correction of the UTC time
– by a voltage interruption
Recording of speed profile
• List of the defined speed ranges and period in this range
• Range: 0 <= v < 1 = Vehicle motionless
The speed profile is divided into 16 zones. During installation, the individual ranges can
be adjusted individually.
Recording of rpm profile
• List of the defined motor rpm ranges and period in this range
• Range: 0 <= n < 1 = Motor off
• Range: 3281 <= n < x = unlimited
The rpm profile is divided into 16 zones. During installation, the individual ranges can be
adjusted individually.
Pos. / block Data block specification / explanation
21
22
23
24
To Next Page
Loading...
