Siemens VDO DTCO 1381 - Page 84

Service only
4.2 The flow of data and memory behaviour Data handling
4 - 10
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Data error motion and
speed
• The longest event on each of the 10
most recent days of appearance
• The 5 longest events of the last 365
days
• Begin – date and time
• End – date and time
• The type, number, and issuing member
state of an inserted card at the
beginning and/or end of the event.
• Number of the same types of events on
this day.
Security breach • The 10 most recent events by type of
event
•Type of event
• Begin – date and time
• End – date and time (if relevant)
• The type, number, and issuing member
state of an inserted card at the
beginning and/or end of the event.
Overspeeding • The most severe instance of the 10
most recent days of appearance (the
event with the highest average speed)
• The 5 most severe events of the last
365 days
• The first event after the most recent cal-
ibration
• Begin – date and time
• End – date and time
• Measured highest speed
• Measured arithmetic average speed
• The driver’s card type, number, and
issuing member state (if applicable)
• Number of the same types of events on
this day.
• Overspeeding control – date and time
• First instance of overspeeding after the
most recent control – date and time
• Number of instances of overspeeding
after the most recent control
Interruption of power
supply
• The longest event on each of the 10
most recent days of appearance
• The 5 longest events of the last 365
days
• Begin – date and time
• End – date and time
• The type, number, and issuing member
state of an inserted card at the
beginning and/or end of the event.
• Number of the same types of events on
this day.
Note
This data can be recorded only after re-
establishing the power supply, whereby the
accuracy here can be one minute.
Event Saving regulations Recorded data