Siemens VDO DTCO 1381 - Page 98

Service only
4.3 Tachograph cards Data handling
4 - 24
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Data on calibrations and time
settings
The following data will be saved about every calibration or time
setting:
• Identification of the DTCO 1381 (recording equipment identifi-
cation)
– Item number
– Serial number
– KITAS 2171 serial number
• Date and purpose of the calibration
– Activation (1)
– Initial installation (2)
– Installation (3)
– Regularly inspection (4)
Calibration parameters The following updated and/or confirmed calibration parameters are
saved on the workshop card:
• Vehicle identification
– Chassis number
– Vehicle registration number
– Registering authority of member state
• Vehicle characteristics
– Characteristic coefficient (w-value)
– Recording equipment constant (k-value)
– Effective wheel circumference
–Tire size
– Legally permitted maximum speed
–Odometer – old value
–Odometer – new value
– Date and time – old value
– Date and time – new value
At least 88 calibrations will be saved.
The workshop card will also save a counter for the total number of
calibrations and the number of calibrations since the last download.