9 - Operation and use
66
9.3 Luminous signals
The machine features a light column to immediately verify the operation status of the machine.
The signals are described below:
STEADY BLUE LIGHT: the machine has stopped or is in stand-by.
FLASHING BLUE LIGHT: machine heating up.
If the machine also has accumulation and flow end sensors, the flashing blue light can mean
there is no flow of products for wrapping, or the need to dispose of products at out-feed.
STEADY GREEN LIGHT: the machine is ready for the packaging phase.
STEADY RED LIGHT: there is an error that has stopped the machine.
vers
press the key to go back to the software
version screen.
esc
press the key to go back to the previous
screen.
menu
press the key to go back to enter the
selected menu.
mod
press the key to modify settings or save
them.
To Next Page
Loading...
