Smipack FP6000CS - General Information; Preface; Warranty and Exclusion of Liability

9
2 - GENERAL INFORMATION
2.1 Preface
While thanking for choosing us, SMIPACK S.p.A. is pleased to welcome you among its large
range of customers, hoping that the use of this machine will fully satisfy you.
This manual can be used for the model FP6000-FP6000CS-FP8000CS It has been drawn up
to put you in conditions to be able to intervene on the various parts, and to understand the
various maintenance and intervention operations.
Before use the machine must be installed, assembled, levelled and connected to the power
supplies (electrical and pneumatic).
It is severely prohibited the reproduction or the disclosure to third parties (even partial) of this
use and maintenance manual worth the penalties provided by the laws in force.
2.2 Warranty and exclusion of liability
SMIPACK declines all liability deriving from:
- electrical and/or pneumatic supply defects;
- lack of maintenance;
- pollution external to the machine;
- unauthorised modifications and repairs;
- use of non-original spare parts;
- acts of God such as earthquakes, floods or fires.
The machine is shipped to the Customer ready to be installed, after it has passed all of the
foreseen tests and inspections in the factory, in compliance with legislation in force. The
warranty has a 365 day validity starting from the date of purchase. During the period covered
by warranty, SMIPACK commits itself to remove any faults or defects as long as periodical
maintenance is performed and original parts are always used. Expendable materials, parts
subject to normal wear or breakage, faults caused by atmospheric agents, transporting the
machine to an assistance centre and labour charges are excluded from the warranty. The
warranty is only valid for the original purchaser and only if the warranty certificate is properly
filled out in every part and sent within 20 days from the date of purchase. Repairs carried out
covered by the warranty do not interrupt or extend the warranty period.
The warranty will become void and invalid immediately in the following cases:
> improper use of the machine
> variation of process conditions
> unauthorised tampering by third parties
> failure to comply with that indicated in the instruction manual
> failure to use the manufacturer's original spare parts